Supercharger Outlet Adapter

REMOVAL
1. Loosen collar on supercharger outlet adapter.
2. Remove nut and upper stud on alternator-power steering pump bracket which supports intercooler inlet tube.
3. Remove two nuts at intercooler.
4. Remove intercooler inlet tube. Use caution so as not to damage sealing surfaces of inlet tube.
5. Remove three adapter-to-supercharger retaining bolts.
6. Remove one stud and position harness bracket out of the way.
7. Remove adapter.

Supercharger Outlet Adapter:

INSTALLATION
1. Clean and inspect sealing surfaces of supercharger and adapter.
2. Apply Loctite 510 or equivalent to supercharger sealing surface.
3. Install outlet adapter using three retaining bolts and one stud. Tighten all four to 20-30 Nm (15-22 lb-ft).
4. Install intercooler inlet tube.
5. START engine and check for leaks and proper operation.