Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Oxygen Sensor: Service and Repair

FOR UPDATED INFORMATION NOT INCLUDED HERE, REFER TO TSB #93236, DATED 11/10/93


REMOVAL

1. Disconnect negative battery cable.

NOTE: When the battery has been disconnected and reconnected, some abnormal drive symptoms may occur while the powertrain control module relearns its adaptive strategy. The vehicle may need to be driven 10 miles or more to relearn the adaptive strategy.

2. Disconnect sensor electrical connector.

3. Using a suitable wrench, remove sensor.

INSTALLATION

1. Install sensor. Tighten to 30-50 Nm (22-36 lb ft).

2. Connect electrical connector.

3. Connect negative battery cable.