Operation CHARM: Car repair manuals for everyone.
Home >> Mercury >> 1992 >> Topaz L4-140 2.3L HSC >> Repair and Diagnosis >> Starting and Charging >> Starting System >> Clutch Switch >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Clutch Switch: Service and Repair

1. On models equipped with airbag, disarm airbag system as described under MAINTENANCE PROCEDURES/AIRBAG SYSTEM DISARMING.
2. Remove trim panel above clutch pedal.
3. Disconnect electrical connector.
4. Remove clutch interlock retaining screw and hairpin clip, then remove switch. Always install the switch with the self-adjusting clip one inch above end of the rod. The clutch pedal must be fully up (clutch engaged) or the switch may be improperly adjusted.
5. Insert eyelet end of rod over pin on clutch pedal, then secure with hairpin clip.
6. Align mounting boss with corresponding hole in bracket, then install retaining screw.
7. Reset clutch interlock switch by depressing clutch pedal to floor.
8. Connect electrical connector, then install trim panel.
9. On models equipped with airbag, rearm airbag system as described under MAINTENANCE PROCEDURES/AIRBAG SYSTEM DISARMING.
pro multis · About Operation CHARM