Tightening Specifications
| Specific Applications | - | - |
| - | Intake Manifold Bolts/Nuts | - Tighten the Allen-head intake manifold nuts and bolts in the sequence shown in the following steps; |
| Step 1: Tighten the intake manifold nuts and bolts to | 3-5 Newton Meter (Nm) | |
| Step 2: Tighten the intake manifold nuts and bolts to | 16-20 Newton Meter (Nm) | |
| Step 3: Tighten the intake manifold nuts and bolts to | 24-27 Newton Meter (Nm) |