Glass/Roof Panel

1. Operate roof opening glass to flush position.







2. Unclip and swing LH and RH sight shields rearward.







3. Loosen LH and RH Torx(R) T20 screws.







4. Adjust front glass edge to flush to 1.0 mm (0.04 inch) low.







5. Adjust rear glass edge to flush to 1.0 mm (0.04 inch) high.
6. Tighten LH and RH Torx(R) T20 screws to 3-5 Nm (27-44 Lb-In).
7. Install LH and RH sight shields.