Cylinder Block Assembly

Cylinder Head Surface (Deck)
Machine, Maximum 0.254 mm (0.010 inch)

Cylinder Bore
Diameter
Standard 90.200 mm (3.551181 inch)
Out-Of-Round
Limit 0.015 mm (0.000591 inch)
Service Limit 0.020 mm (0.000787 inch)
Surface Finish (RMS) 0.2-0.6 microns
Taper, Maximum 0.006 mm (0.000236 inch)

Main Bearing Bore
Diameter 72.402-72.422 mm (2.850472-2.851260 inch)