Fuel Filter: Service and Repair

REMOVAL
1. Perform fuel pressure release procedure.
2. Raise vehicle on hoist.
3. Remove the push connect fittings at both ends of the fuel filter as described. Install new retainer clips in each push connect fitting.
4. Remove fuel filter from fuel filter bracket by loosening worm gear clamp. Note the direction of the flow arrow as installed in the fuel filter to make sure proper direction of fuel flow through replacement fuel filter.

INSTALLATION
1. Install the fuel filter into the fuel filter bracket, ensuring the proper direction of flow.
2. Tighten worm gear clamp to 1.7-2.8 Nm (15-24 lb in).
3. Install the push connect fittings onto the fuel filter.
4. Lower vehicle.
5. Start engine and inspect for leaks.