Rear Wheel Alignment

NOTE: All specifications are given for a vehicle at curb load.

CAMBER:
Nominal -0.50°
Minimum -1.00°
Maximum +0.00°
Difference/Split (Left Minus Right)
Nominal +0.00°
Minimum -0.50°
Maximum +0.50°

TOTAL TOE [a]
Degree:
Nominal +0.12°
Minimum -0.13°
Maximum +0.37°

mm/inch:
Nominal +1.50 mm (+0.06 inch)
Minimum -1.15 mm (-0.06 inch)
Maximum ±4.50 mm (±0.18 inch)

LEFT & RIGHT TOE [a]
Degree:
Nominal +0.06°
Minimum -0.19°
Maximum +0.31°

mm/inch:
Nominal +0.75 mm (+0.03 inch)
Minimum -2.25 mm (-0.09 inch)
Maximum ±3.75 mm (±0.15 inch)


[a] Positive value is toe-in, negative value is toe-out.