Cylinder Block Assembly

GENERAL SPECIFICATIONS
Head Gasket Surface Flatness 0.08 mm (0.003 in) in 152.0 mm (6.00 in)
Head Gasket Surface Finish (RMS) 2.3-3.8 micrometers
Cylinder Bore
Diameter 89.00 mm (3.504 in)
Surface Finish (RMS) 0.45-0.96 micrometers (0.0178-0.038 micro in)
Out-of-Round Limit 0.015 mm (0.0006 in)
Out-of-Round Service Limit 0.050 mm (0.002 in)
Taper Service Limit 0.050 mm (0.002 in)
Main Bearing Bore Diameter 68.905 mm (2.713 in) 68.885 mm (2.712 in)

TORQUE SPECIFICATIONS
Oil Galley and Cooling Jacket Plugs 20 Nm (14 ft. lbs.)