Operation CHARM: Car repair manuals for everyone.
Home >> Mercury >> 1998 >> Tracer L4-122 2.0L SOHC >> Repair and Diagnosis >> Cruise Control >> Cruise Control Servo Cable >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Cruise Control Servo Cable: Service and Repair

REMOVAL







1. Disconnect the battery ground cable.







2. Disconnect the (A) speed control actuator cable from the (B) throttle control lever and remove the (C) bolt from the (D) bracket.







3. Remove the speed control actuator cable retaining clip.







4. Remove the speed control actuator cable cap.
1 Depress the speed control actuator cable cap retaining tab.
2 Rotate the speed control actuator cable cap counter clockwise.







5. Slide the (A) speed control actuator cable end from the (B) speed control actuator cable groove, and remove the speed control actuator cable.







INSTALLATION
1. To install, reverse the removal procedure.

NOTE: When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive strategy. The vehicle may need to be driven 16 km (10 miles) or more to relearn the strategy.
pro multis · About Operation CHARM