Torque Converter

General Specifications
Converter Turbine Shaft Seal (Inner) Diameter 20 mm (0.787 inch)
Torque Converter Stall Torque Ratio 2.420
Torque Converter Stator Support O-Ring (Inner) Diameter 82.9 mm (3.264 inch)
Torque Converter to Converter Housing Installed Height 13.6 mm (0.535 inch)
Total End Play 0.25 - 0.5 mm (0.010 - 0.020 inch)

TORQUE SPECIFICATIONS
Torque Converter Clutch Solenoid Bolts 7.9 - 10.7 Nm (70 - 95 inch lbs.)
Torque Converter to Engine Flywheel Nuts 35 - 49 Nm (26 - 36 ft. lbs.)
Torque Converter Stator Support Bolts 11 - 13 Nm (96 - 121 inch lbs.)