Crankshaft, Engine

GENERAL SPECIFICATIONS
Main Bearing Journal Diameter 57.98-58.0 mm (2.2827-2.2835 inch)
Out-of-Round Limit 0.008 mm (0.00032 inch)
Taper Limit 0.008 mm (0.0003 inch) per 25.4 mm (1 inch)
Journal Runout Limit (Runout of bearings 2,3, and 4) 0.05 mm (0.002 inch)
Crankshaft End Play 0.100-0.300 mm (0.004-0.012 inch)
Surface Finish (RMS) 0.3 micro mm (12 micro in)
Clearance to Crankshaft 0.020-0.065 mm (0.0008-0.0026 inch)
Thrust Bearing Journal Length 28.825-28.854 mm (1.135-1.136 inch)
Connecting Rod Journal Diameter 43.89-43.91 mm (1.7279-1.7287 inch)
Out-of-Round Limit 0.008 mm (0.00032 inch)
Taper Limit 0.008 mm (0.0003 inch) per 25.4 mm (1 inch)
Surface Limit (RMS)
Rear 0.6 mm (25 inch)
Front 0.9 mm (35 inch)
Crankshaft End Play 0.100-0.300 mm (0.004-0.012 inch)