Connecting Rod

GENERAL SPECIFICATIONS
Connecting Rod Piston Pin Bore Diameter 20.570-20.610 mm (0.8098-0.8114 inch)
Crankshaft Bearing Bore Diameter 46.89-46.91 mm (1.8460-1.8468 inch)
Out-Round-Limit - Piston Pin Bore 0.008 mm (0.0003 inch)
Taper Limit Piston Pin Bore 0.0038/25.4 mm (0.00015/1 inch)
Length (Center to Center) 131.905-131.975 mm (5.193-5.196 inch)
Out-of-Round Limit - Bearing Bore 0.010 mm (0.0004 inch)
Taper Limit - Bearing Bore 0.010 mm (0.0004 inch)
Alignment Bore-to-Bore (max. Differential)
Twist 0.05 mm (0.002 inch)
Bend 0.038 mm (0.014 inch)
Side Clearance (Assembled to Crank)
Standard 0.092-0.268 mm (0.004-0.011 inch)
Service Limit 0.356 mm (0.014 inch)

TORQUE SPECIFICATIONS
Connecting Rod Cap Nuts 35-41 Nm (26-30 ft. lbs.)