Rear Door Panel: Service and Repair

TRIM PANEL - REAR DOOR

Removal

NOTE:
- High series shown, low series similar.
- The window glass must be completely down to remove the rear door trim panel.







1. Remove the screws.







2. Remove the inside door handle cup.







3. On low series rear door trim panel, remove the window regulator handle.
- Remove the screw.







4. Start in a lower corner and work around the panel and separate the rear door trim panel from the rear door to disengage the pin-type retainers.







5. Remove the rear door trim panel by lifting to disengage the top lip from the weatherstrip.
6. Turn the rear door trim panel over.







7. Disconnect the power window switch electrical connector.
1. Remove the screws.
2. Disconnect the electrical connector.

Installation
1. To install, reverse the removal procedure.