50/50 Split Bench

Safety Belt Bolt Bit:

SPECIAL SERVICE TOOLS

REMOVAL
1. Fold the rear seat cushion assembly forward.







2. Remove the retaining nut from the end of the link arm and slide the link arm off the stud on the seat cushion frame.
3. Return the seat back assembly to the upright position.







4. Remove the retaining nuts from the front floor attachment.
5. Remove the seat cushion assembly from the vehicle.







6. Use Safety Belt Bolt Bit to remove the safety belt bolt.







7. Remove the rear outboard nut.







8. Slide the seat back assembly off the center pivot bracket and remove the seat back assembly from the vehicle.

INSTALLATION
1. Install the seat back (with link arm) onto the pin on the center pivot bracket and position the seat onto the floor pan.







2. Install the rear outboard nut.







3. Use Safety Belt Bolt Bit to install the rear outboard bolt.







4. Install the seat cushion. Install the nuts.







5. Install the link arm nut.