Front

Removal

1. WARNING: The electrical power to the air suspension system must be shut off prior to hoisting, jacking or towing an air suspension vehicle. This can be accomplished by turning off the air suspension switch located in the rear jack storage area. Failure to do so can result in unexpected inflation or deflation of the air springs or shocks, which can result in shifting of the vehicle during these operations.

Raise the vehicle on a hoist.





2. Remove the front stabilizer bar links.
1 Remove the from stabilizer bar link nut.
2 Remove the from stabilizer bar link bolt.
3 Remove the front stabilizer bar spacer.





3. Remove the front stabilizer bar.
1 Remove the four (two each side) stabilizer bar bracket bolts.
2 Remove the stabilizer bar.

Installation








1. Note: In the event the self-tapping bolts cannot be installed in the frame, there is a kit available with flag nuts; consult your parts department for further information.

Follow the removal procedure in reverse order.