Operation CHARM: Car repair manuals for everyone.

Input Shaft and Bearing

Special Tools:






Disassembly

1. Inspect the input shaft bearing.





2. Remove and discard the front bearing oil scoop ring.





3. CAUTION: Use of essential tools may cause damage to the bearings being removed.

CAUTION: Hold the input shaft so it does not fall.

Note: Only remove the bearing if replacement is necessary.

Use (A) Bearing Cone Remover and an (B) arbor press to remove the (C) bearing.

Assembly





1. Use (A) Bearing Cone Replacer, (B) Bearing Cone Remover, and an arbor press to install the (C) bearing.





2. Install the front bearing oil scoop ring.
- A click should be felt as the scoop ring notches align with the input shaft oil holes.