Torque
| Crankshaft damper-to-crankshaft bolt | 107 ft. lbs. | |
| Crankshaft main bearing cap stud bolt | 59 ft.lbs. | |
| Crankshaft pulley-to crankshaft damper bolts | 35 ft. lbs. | |
| Engine front cover-to-cylinder block bolts | 18 ft. lbs. | |
| Flywheel-to-crankshaft bolts | 59 ft. lbs. | |
| Oil pan-to-cylinder block bolts | Stage 1: Tighten the four corner bolts | 9 ft.lbs. |
| Stage 2: Tighten the remaining bolts from back to front | 9 ft.lbs. | |
| Stage 3: | Check all bolts for correct tightness | |
| Oil pan drain plug | 10 ft. lbs. | |
| Oil pump-to-crankshaft main bearing cap bolt | 35 ft. lbs. | |
| Transaxle-to-engine bolts | 37 ft. lbs. |