Test F
PINPOINT TEST F: DTC B2363 POSITION SENSOR SYSTEM FAILURETest F1-F3:
Test F3-F5:
Test F6-F8:
Normal Operation
The power sliding door module self-test will power open and close the PSD. As the PSD is opened, the position sensor is used to track the PSD movement and position. The appropriate PSD module supplies a 5 volt reference voltage to the position sensor on a valid open command or anytime the power sliding door is in the open position. The power sliding door module constantly supplies the ground. If the self-test fails to detect door movement, DTC B2363 will set.
Possible Causes
- circuit 1205 (BK) open
- PSD position sensor installation
- PSD position sensor
- PSD module