Operation CHARM: Car repair manuals for everyone.
Home >> Mercury >> 2005 >> Mariner 2WD V6-3.0L VIN 1 >> Repair and Diagnosis >> Cruise Control >> Brake Switch (Cruise Control) >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Brake Switch (Cruise Control): Service and Repair

SPEED CONTROL DEACTIVATOR SWITCH







Removal
1. Disconnect the electrical connector.
2. Rotate the speed control deactivator switch 45 degrees counterclockwise to disengage it from the bracket.

Installation







CAUTION: The initial installation of a speed control deactivator switch allows for adjustment. If additional adjustments are required, install a new switch.

1. Release the plunger lock.
- Turn the lock knob counterclockwise until the first click is felt.

2. Press and hold the brake pedal.
3. Install the speed control deactivator switch.
1 Position the speed control deactivator switch in the bracket and rotate clockwise 45 degrees.
2 Connect the electrical connector.

4. NOTE: There should be an extra click heard when tugging on the brake pedal.

Slowly release the brake pedal and tug moderately once the pedal reaches the rest position.
pro multis · About Operation CHARM