Front Door Latch: Service and Repair
FRONT DOOR LATCHExploded View
Part 1:
Part 2:
Removal and Installation
NOTE: The door glass must be completely raised.
1. Remove the front door trim panel.
2. Position the water shield aside.
3. Remove the exterior front door handle reinforcement.
4. Remove and discard the 3 front door latch bolts.
- To install, tighten to 12 Nm (9 lb-ft).
5. Disconnect the front door latch electrical connector.
6. Remove the front door latch.
- Slide the front door latch towards the front of the vehicle.
- Remove the front door latch with the door lock actuating rod and the interior door handle actuating cable.
7. If necessary, remove the door lock actuating rod and the interior door handle actuating cable.
8. To install, reverse the removal procedure.
- Lubricate the front door latch to striker surfaces after installation.