Dana 30 Front Drive Axle/Differential

Stub Shaft Pilot Bearing and Seal














Removal

Both sides
1. Remove the halfshafts.

Right side
2. Remove the axle shaft.





Both sides
3. Using the special tool and a suitable slide hammer, remove the stub shaft oil seals.





4. Using the special tool and a slide hammer, remove the stub shaft pilot bearings.





5. Clean the bearing and seal surfaces of any foreign material.

Installation

Right side
1. Using the special tools, install the stub shaft pilot bearing.





2. Using the special tools, install the stub shaft oil seals.





3. Install the axle shaft.





Left side
4. Using the special tools, install the stub shaft bearing.





5. Using the special tools, install the stub shaft seal.





Both sides
6. Refill the front drive axle to the correct level with lubricant.
7. Install the halfshafts.