Operation CHARM: Car repair manuals for everyone.
Home >> Mercury >> 2010 >> Milan FWD V6-3.0L >> Repair and Diagnosis >> Accessories and Optional Equipment >> Entertainment Systems >> Entertainment System Control Panel >> Service and Repair >> Front Display Interface Module (FDIM)
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the logical successor to CHARM, I recommend you try it!

Link: lemon-manuals.la

Front Display Interface Module (FDIM)




Front Display Interface Module (FDIM) - Fusion, Milan

NOTE: Without navigation shown, with navigation similar.











Removal and Installation

NOTE: Vehicles without navigation require Programmable Module Installation (PMI) when a new module is being installed. For vehicles without navigation, the Front Display Interface Module (FDIM) is not a stand-alone module.

1. For vehicles without navigation, upload the FDIM configuration information to the scan tool. For additional information, refer to PMI in Information Bus. Programming and Relearning

2. Remove the instrument panel center finish panel. For additional information, refer to Instrument Cluster / Carrier &/or Interior Moulding / Trim.

3. NOTICE: For vehicles with navigation, make sure not to bend the video cable when removing the FDIM.
Remove the 4 screws and the FDIM.
- Disconnect the electrical connectors.

4. To install, reverse the removal procedure.
- For vehicles without navigation, download the configuration information to the FDIM. For additional information, refer to PMI in Information Bus. Programming and Relearning
pro multis · About Operation CHARM