Keyless Entry Key-Pad: Testing and Inspection

Keyless Entry Keypad Code Programming

Programming A Personal Keyless Entry Keypad Code

NOTE: Up to 3 personal keyless entry keypad codes can be programmed.

1. Enter the factory set keyless entry keypad code.

2. Within 5 seconds, press the 1/2 button on the keypad.

3. Enter the personal 5-digit keyless entry keypad code. Each number must be pressed within 5 seconds of each other.

4. To store each new personal code, press the 1/2 button within 5 seconds of entering the fifth digit of the new code to store the first code, for the second code press the 3/4 button, or for the third code press the 5/6, 7/8, or 9/0. The doors lock then unlock, confirming the new code is programmed.

5. The door locks lock and unlock, confirming the new code is programmed.

Erasing the Personal Keyless Entry Keypad Codes

1. Enter the factory set keyless entry keypad code.

2. Within 5 seconds, press and release the 1/2 button.

3. Within 5 seconds, press and hold the 1/2 button for 2 seconds.

4. The personal codes are now erased and only the factory set code will work.