Replacing Halogen-Light Bulb For Foglight

Replacing Halogen-light Bulb For Foglight


NOTE: Depending on the bulb (left or right) being replaced, the front road wheels will need to be on full lock to gain sufficient access. Follow the table below:
LH bulb Turn road wheels on full left turn lock.
RH bulb Turn road wheels on full right turn lock.







Remove scrivet fixings (1) and screw (2) securing front face of wheel arch liner.
Release wheel arch liner (3) to gain access to rear of fog light.







Rotate bulb holder collar (1) in an anti-clockwise direction, and release bulb holder from light housing.







Noting the fitted position of old bulb, remove bulb from holder (1).

Install hint:
Do not touch glass part of bulb with bare fingers. Only touch bulb on base or with a clean cloth or packaging of light bulb.

Install hint:
Before fitting lamp holder back into light, ensure the sealing ring is fitted correctly and clean.


NOTE: For new bulb specification, See Headlamp Bulb/Specifications.