Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Front


Adjusting Front Axle (With KDS) (Toe-In And Camber)
If camber is not within specification refer to trouble shooting section.Troubleshooting at Rear Axle (Checking Axle Geometry)

To adjust toe-in/toe differential angle:

Move wheels and steering gear to straight a head position.





Slacken clamping nut (1) on steering tie rod.

Adjust wheel toe in to specified value by turning tie rod at hexagon head (2).

Install hint:
Make sure steering bellows (3) is not turned.



Locknut inner ball joint to outer ball joint
M14 x 1.5 Nut 63 Nm