0F Internal Fault (Stack)
0F Internal Fault (Stack)
Possible Cause(s) of Fault:
- Memory cell defective
Storage Condition(s):
- The memory content of the CPU data is checked for plausibility. If an implausibility is indicated, a fault entry is made.
Troubleshooting Procedure:
- Clear fault memory, switch ignition off/on and check whether the fault is entered again
- Yes: replace steering angle sensor
- No: ignore fault, as it is likely that EMC scatter was the cause
Note: After replacing the steering angle sensor, it must first be coded and then calibrated using the ABS/DSC diagnostic program.