Chassis/Wheel Alignment Without Load

32 00 155 - Chassis/wheel alignment without load





Note:
- Read and comply with General chassis definition Electronic Wheel Alignment (With KDS)
- Read and comply with notes on Chassis allocation via optional extra
- Read and comply with More detailed information Description and Operation on chassis alignment system (Beissbarth).





- Check compliance with test conditions Normal Position, bring vehicle to a stop if necessary.
- If necessary, prepare lifting platform.
- Drive vehicle onto lifting platform.
- If necessary, switch on chassis alignment system.
- Enter vehicle data and customer data
- Enter tire pressure and tread depth
- Measure and enter ride height
- Attach quick-clamping holder/quick-clamping unit and pickup to vehicle
- Mount spoiler adapter if necessary
- Install brake tensioner.
- Perform input measurement in accordance with equipment manufacturer's instructions.





- Compare specified values with actual values
- If necessary, adjust front axle and rear axle





- Perform output measurement in accordance with equipment manufacturer's instructions.
- Carry out steering angle sensor adjustment
- Save and print out test record.
- Remove chassis/wheel alignment system
- Drive vehicle off lifting platform.