Replacing drive belt (without A/C system)

11 28 012 Replacing drive belt (without heating and air conditioning system)





Necessary preliminary work:
^ Remove the right wheel arch cover.
^ Remove friction gear.





Cut through drive belt (1) with a suitable tool (2).

Position supplied tool (1) on vibration absorber (see arrow).








Attach mounting tool in direction of arrow and slide further in direction of arrow.





Bring mounting tool (1) on vibration absorber into installation position.

Place the drive belt (1) onto alternator (2).








Place drive belt (1) in direction of arrow on vibration absorber.

Note:
See graphic.





Turn vibration absorber in direction of arrow.

Press the drive belt (1) inwards by hand or with a mounting lever (see arrow).

Important!
Danger of injury!

Turn vibration absorber until the drive belt is fully engaged.





Remove mounting tool (1) from vibration absorber.

Note:
Mounting tool is no longer needed.





Reassemble the vehicle.