Campaign - Voice Input System Inoperative

SI M65 05 08
Audio, Navigation, Monitors, Alarms, SRS

June 2008
Technical Service

PERFORM THE PROCEDURE OUTLINED IN THIS SERVICE INFORMATION ON ALL
AFFECTED VEHICLES BEFORE CUSTOMER DELIVERY OR THE NEXT TIME THEY
ARE IN THE SHOP FOR MAINTENANCE OR REPAIRS.

SUBJECT
Service Action: Check SVS Function

MODEL
R55 (Cooper Clubman, Cooper S Clubman) with SA609 Navigation System

R56 (Cooper, Cooper S) with SA609 Navigation System

SITUATION
On certain vehicles, the Voice Input System (SVS SA 620) does not function.

CAUSE
SVS was not installed in the vehicle.

AFFECTED VEHICLES
This Service Action involves R55 and R56 vehicles which were produced from October 2007.

In order to determine whether a specific vehicle is affected by this Service Action, it will be necessary to reference the attached VIN list. If the vehicle is included on the VIN list, check the driver's door jamb
for a service action label code with code number 37 punched out. If code number 37 is already punched out, this Service Action has already been completed.





The chassis number ranges listed below are only for informational purposes, and are not to be considered as the only deciding factor.

PROCEDURE

1. Verify that this vehicle is affected by this Service Information by checking the attached VIN list.

2. If the VIN number is included on the list, submit a PuMA case with the subject "SVS missing SI M65 05 08". Note in the case comments if the vehicle has a JCW (John Cooper Works) kit installed.

3. A modified vehicle order (VO) and enabling code (SWT), together with the SVS retrofit instructions, will be attached to the case.

4. Following the retrofit instructions, install any necessary hardware.

5. Import the vehicle order, using the latest version of Progman. Note: Other modules may be updated at the same time if the vehicle has an older integration level.

6. After the new vehicle order has been imported, select "CCC" from the module list.

7. Select "Encoding" of the CCC.

8. After the encoding is completed, turn the ignition off and let the CCC go to sleep (after 5 minutes).

9. Check the functionality of the SVS system.SVS system.





PARTS INFORMATION

LABEL INSTRUCTIONS

This Service Action has been assigned code number 37. After the vehicle has been checked and/or corrected, obtain a label (MD20-036) and:

A. Emboss your MINI dealer warranty number in
the middle of the label (1);

B. Punch out code number 37 (2), printed on the
label; and





C. Affix the label to the B-pillar as shown.

If the vehicle already has a label from a previous Service Action/Recall Campaign, affix the new label next to the old one. Do not affix one label on top of another one because a number from an underlying label could appear in the punched-out hole of the new label.

WARRANTY INFORMATION








Covered under the terms of the MINI New Vehicle Limited Warranty.

ATTACHMENTS





view PDF attachment M650508VIN_List.





Disclaimer