0F Internal Fault (Stack)

0F Internal Fault (Stack)

Possible Cause(s) of Fault:
- Memory cell defective

Storage Condition(s):
- The memory content of the CPU data is checked for plausibility. If an implausibility is indicated, a fault entry is made.

Troubleshooting Procedure:
- Clear fault memory, switch ignition off/on and check whether the fault is entered again
- Yes: replace steering angle sensor
- No: ignore fault, as it is likely that EMC scatter was the cause

Note: After replacing the steering angle sensor, it must first be coded and then calibrated using the ABS/DSC diagnostic program.