Footwell Module
Footwell Module
Footwell module
The footwell module picks up the signals from the doors and controls the lighting. Moreover, the footwell module is also the interface to the instrument panel.
Brief component description
The footwell module is located in the footwell on the driver's side. The footwell module and the junction box electronics control the power windows drives.
System functions
The footwell module processes the signals from the doors and controls the lighting. The footwell module is also the interface to the instrument panel. Depending on the equipment version, the footwell module picks up the following signals:
- Ride height sensor
- Reversing light switch
- Brake lamp switch
- Hazard warning flasher switch
- Light switch
- Driver's door switch block
- Door contacts
- Driver's door lock
The following functions are controlled by the footwell module:
- Communication between the LIN bus and body CAN
- Storing vehicle order
- Exterior mirrors
- Exterior lighting
- Interior lighting
- Central locking system
- Front power windows
Communication
The footwell module enables communication to take place between the LIN bus and the body CAN.
Storing vehicle order
The vehicle order is stored in the footwell module. The vehicle order enables the vehicle to be identified. Besides the type code number, the vehicle order contains all important equipment features on the vehicle.
Exterior mirrors
There are two equipment variations of the switch block in the driver's door:
- Basic version of the driver's door switch block
The switch block sends its signals directly to the footwell module.
- High version of the driver's door switch block
This switch block is connected to the LIN bus. The requests to adjust the exterior mirrors are sent via the LIN bus.
Exterior lighting
The lighting functions are integrated into the footwell module. These lighting function are:
- Parking lamps
- Low-beam headlights
- High-beam headlamps
- Headlamp flasher
- Fog lights
- Rear foglamp
- Turn signals
- Hazard warning flashers
- Brake lamp
- Reversing lamps
- Parking lamps
Besides the lighting functions, other exterior lighting functions are also integrated in the footwell module:
- Lighting system monitoring
- Headlight vertical aim control
- Emergency operating mode if the footwell module fails
- Lamp replacement
- "Follow-me-home" lighting
- Visual alarm after anti-theft alarm has been triggered
- Actuation of bi-xenon headlamps
All lighting functions except the additional brake light are activated with pulse-width modulated signals by the footwell module. These pulse-width modulated signals enable a uniform brightness of the exterior lighting.
Interior lighting
On vehicles without a roof operating facility, the footwell module actuates the interior lighting in the roof area directly. All footwell module outputs for interior lighting are pulse-width modulated. With standard equipment, the interior lighting comprises the following components:
- Front interior light
- Luggage compartment lights
- Glove compartment lighting
- Footwell lighting
The following components can also be installed as optional extra for the interior lighting:
- Rear interior light
- Courtesy lighting
Central locking system
The footwell module evaluates the status of the Hall effect sensors in the door contacts. When the vehicle is locked or unlocked with the mechanical key element, the footwell module will recognise this request. The footwell module sends a message on the body CAN to the Comfort Access.
Power windows
The footwell module and the junction box electronics activate the power-window motors. The relays for the front power windows motors are located in the footwell module.
Notes for Service department
The following information on the footwell module is available for service staff:
Notes on encoding/programming
Nearly all Car and Key Memory functions are programmed inside the vehicle itself.
We can assume no liability for printing errors or inaccuracies in this document and reserve the right to introduce technical modifications at any time.