Fault Profiles For telephony (ULF-SBX Interface Box)

Fault Profiles For Telephony (ULF-SBX Interface Box)

The following fault profiles are covered in this test module:

Telephony
- If a call is accepted on the mobile phone, the CCC shows the name with 5 asterisks.
- After call acceptance, the display with the call time is displayed with a delay of up to 15 seconds.
- The telephone call is accepted on the mobile phone in the hands-free mode is switched on without the user requesting this.
- The telephone call is accepted via the Control Display (telephone hands-free mode). Transferring the call by means of the hands-free button to the mobile phone (Privacy mode) does not work.
- After call acceptance of a 2nd incoming call, the phone number and name are not shown in full or not shown correctly in the display.
- Telephone calls cannot be accepted or set up. The Bluetooth connection is lost during telephone calls via the hands-free unit. The display shows: no suitable telephone present.
- After calling a phone number that is engaged, no call can be placed for some time. Shortly thereafter, "terminated" appears on the Control Display.
- The user's own phone number is not transferred.
- When a call is being made, the phone number displayed on the Control Display is not the dialled number.