Removing and Installing Engine

11 00 050 - Removing and installing engine (N14)





Special tools required:
- 11 0 260 11 0 260 Engine Hoist





Necessary preliminary tasks:
- Remove exhaust system.
- Drain engine oil Service and Repair.
- Disconnect negative battery lead.
- Remove both output shafts.
- Remove air cleaner housing Service and Repair
- Detach all coolant hoses from engine.
- Detach vacuum line from brake booster.
- Unfasten engine wiring harness and lay to one side.
- Remove complete front panel





Attach special tool 11 0 260 11 0 260 Engine Hoist to lifting eye (1) on engine.

Note:
Pictures show N12.





Attach special tool 11 0 260 11 0 260 Engine Hoist to lifting eye (1) at transmission end.

Note:
Pictures show N12.





Remove engine with special tool 11 0 260 11 0 260 Engine Hoist towards front.

Note:
Pictures show N12.





Assemble engine.
Check function of DME.