16 14 015 Removing and Installing/Replacing Fuel Pump With Fuel Level Sensor (50-Liter Tank)

16 14 015 - Removing and installing/replacing fuel pump with fuel level sensor (50-liter tank)





Special tools required:
- 16 1 020





Recycling
Fuel escapes when fuel lines are detached. Have a suitable collecting container ready.

Catch and dispose of escaping fuel.

Observe country-specific waste-disposal regulations.





Important!
Ensure adequate ventilation in the place of work!

Avoid skin contact (wear gloves)!

Before starting the engine for the first time:

- Fill fuel tank with at least 5 liters of fuel.





Necessary preliminary tasks:
- Draw off fuel from fuel tank Procedures
- Remove rear seat Rear Seat, Through-Loading





Push trim panel (1) forward.

Unscrew nuts (2).

Tightening torque, 16 11 2AZ 16 11 Fuel Tank and Mounting Parts.

Remove cover (3).





Disconnect plug connection.





Release screw cap with special tool 16 1 020.

Installation:
Tightening torque 16 14 1AZ 16 14 Fuel Pump.





Raise unit.

Note:
To improve installation, secure cable (1) and lines (2 and 3) with cord.

Disconnect plug connection (1).

Unlock line (2) at quick-release fastener and detach.

Unclip line (3).

Carefully lift fuel pump with fuel level sensor out of fuel tank.

Installation:
Replace rubber seal (4).





Installation:
When installing fuel level sensor, make sure lug (1) engages in recess (2) on tank.