Wipers/Washers - Wiper Insert Replacement Information
SI M61 03 06General Electrical Systems
April 2013
Warranties
This Service Information bulletin supersedes SI 61 03 06 dated August 2009.
[NEW] Please read this Service Information bulletin in its entirety; the content has been completely updated.
[NEW] designates changes to this revision
SUBJECT
MINI Maintenance Program: Replacement Wiper Inserts
MODEL
All
SITUATION
The MINI Maintenance Programs allow for the replacement of wiper blade inserts:
^ At intervals of 12 months or longer, only when necessary, for the models
The replacement interval begins on the vehicle's original in-service date.
This policy supersedes all other statements concerning wiper blade maintenance replacement intervals (front and rear when applicable).
Note:
There is no required replacement at 12 months.
Wiper Blade and Insert Care
Regularly clean the wiper blade assemblies with soapy water to avoid streaking.
Windshield Care
Wax, dirt and road film buildup on the windshield can cause streaking, poor wiper operation and premature wear of the wiper blade inserts. The windshield should be cleaned regularly to remove contamination. Use MINI approved car care products to clean and care for the vehicle.
PARTS INFORMATION
It is important to use the "Set" part numbers, which contain both front wiper blades, when available.
WARRANTY INFORMATION
Covered under the terms of the MINI Maintenance Programs.