Disassembly

Fig. 26 Automatic freewheeling hub components.:

Automatic Freewheeling Hub

1. Remove housing C-ring using a screwdriver, Fig. 26.
2. Remove brake (B) and (A) and brake spring, then the housing snap ring.
3. Push in drive gear using press MB990811-01 or equivalent, then remove retainer. Ensure pressing force does not exceed 441 lbs.
4. Slowly reduce pressure of press until return spring fully relaxes. Use caution retainer (A) is not caught by retainer (B) when reducing pressure of press.
5. Remove retainer (B), return spring, slide gear assembly and drive gear assembly from body.
6. Push in cam, then remove slide gear C-ring while spring is compressed.

Fig. 28 Manual freewheeling hub components:

Manual Freewheeling Hub

1. Remove snap ring and inner hub from freewheeling hub body using a suitable screwdriver, Fig. 28.
2. Remove snap ring from inner hub with snap ring pliers.