Headlight Adjustment

HEADLIGHT ADJUSTMENT

NOTE: When adjusting headlight, disconnect the other headlight harness.

1. The low beam headlight will project on the screen upper edge of the beam (cut-off).







2. Turn the adjusting screws to achieve the specified low-beam cut-off location on the aiming screen.

Standard value:
(Vertical direction) Horizontal center line ± 50.5 mm (± 2.0 inches) (0.38°)

CAUTION: Do not cover a headlight for more than three minutes to prevent the plastic headlight lens deformation.

NOTE: There is no horizontal aim adjustment. Horizontal aim is preset and does not require adjustment. High-beam pattern should be correct when the low-beams are adjusted properly.