Label Installation
Figure 26:
Figure 27:
1. Remove all dirt from the old service label. Install the new service label (Figure 26) over the old label on the underside of the hood (Figure 27).
Figure 28:
2. Write in the following information under the white flap on the Emission Recall Completed Label:
* YOUR 5-DIGIT DEALER CODE
* DATE THAT REPAIRS WERE MADE (Month/Year/Date).
Figure 29:
3. Remove all dirt and oil from the area on the hood at the lower right side of the Service Label. Carefully remove the white paper from the backside of the flap. Press the now clear flap portion onto the label. Affix the Emission Recall Completed Label along the LOWER RIGHT side of the Service Label (Figure 29).