Removal and Installation

EVAPORATOR

REMOVAL AND INSTALLATION

SERVICE POINTS OF REMOVAL
- DISCONNECTION OF LIQUID PIPE AND SUCTION HOSE
If the hoses or pipes are disconnected, cap the hoses or pipes with a blank plug to prevent entry of dust, dirt, and water.

- REMOVAL OF GLOVE BOX





(1) After removing the stopper, remove the glove box installation screws.





(2) Pull 1 the glove box right side toward you, and then remove 2 the glove box from the instrument panel.





- REMOVAL OF EVAPORATOR
(1) Remove the evaporator's plate.
(2) Clear the instrument panel at the notched part of the evaporator (after the plate has been removed), and then remove the evaporator.

CAUTION: Do this work carefully so as not to damage the insulator.

SERVICE POINTS OF INSTALLATION
- INSTALLATION OF LIQUID PIPE AND SUCTION HOSE