Ignition Lock: Testing and Inspection

KEY INTERLOCK MECHANISM CHECK





1. Carry out the following inspection.





2. When any of the above checks are not normal, adjust the key interlock cable in following procedure.
1. Remove the floor console.
2. Shift selector lever to "P."
3. Turn the ignition key to "LOCK" (OFF) position.
4. Loosen the locking nut of the key interlock cable.
5. Push the cable joint on the lock cam gently toward the arrow until the cable stops. Tighten the locking nut.
6. Install the floor console.
3. Repeat Steps 1 and 2 as necessary.