24. Tape Gets Caught In Mechanism

NOTE: When the tape is caught in the mechanism, the tape case may not eject. When this occurs, do not try to force the tape out as this may damage The tape player mechanism. Take the cassette to a service dealer for repair.

DIAGNOSIS
Does the player work normally if tape is changed?

NOTE: Check that the tape label is not loose, that the tape itself is not deformed and that the tape is tightly wound. Also, tape with a length of C-120 or greater can often get caught in the mechanism and should not be used.

If yes, the tape used is defective. Check that the malfunction is eliminated.

If no, repair or replace the tape player. Check that the malfunction is eliminated.