Quarter Window Glass: Service and Repair

Quarter Window Glass:

REMOVAL SERVICE POINT

[[A]] QUARTER WINDOW GLASS REMOVAL
Remove the quarter window glass by the same procedure as for the windshield.

INSTALLATION SERVICE POINT

]]A[[ WINDOW DAM/DUAL LOCK FASTENER/QUARTER WINDOW GLASS INSTALLATION







1. Use 3M(TM) AAD Part number 8880 or equivalent to degrease the window dam and dual lock fastener mounting surface on both the glass and the body.

CAUTION: Allow the degreased portion to dry for at least three minutes before proceeding to the next procedure. Do not touch any surface that has been cleaned.

2. Attach the window dam.
3. Install the dual lock fastener to the shown position.
4. Apply primer and adhesive.
5. Install the glass in the same way as for the windshield.