Inspection Procedure 1

DIAGNOSIS

STEP 1. Check the vacuum tank for damage.
If damaged, replace the tank. Then go to Step 7.
If normal, go to Step 2.

STEP 2. Check the check valve for damage.
If damaged, replace the valve. Then go to Step 7.
If normal, go to Step 3.

STEP 3. Check the actuator assembly for damage.
If damaged, replace the actuator assembly. Then go to Step 7.
If normal, go to Step 4.

STEP 4. Check the solenoid valve operation.
If faulty, replace the valve. Then go to Step 7.
If normal, go to Step 5.

STEP 5. Check the shift fork, mainshaft and clutch gear for damage.
If damaged, replace the part. Then go to Step 7.
If normal, go to Step 6.

STEP 6. Check for looseness in the actuator assembly installation bolt.
If loose, tighten to 17 Nm (13 ft. lbs.). Then go to Step 7.

STEP 7. Check symptoms. Check that the clutch locks.