Inspection Procedure 2
DIAGNOSISSTEP 1.Check the accelerator pedal.
Q: Is the accelerator pedal loose?
YES: Tighten, then go to Step 4.
NO: Go to Step 2.
STEP 2.Check the accelerator cable wiring.
Q: Is the accelerator cable routing bent sharply?
YES: Repair, then go to Step 4.
NO: Go to Step 3.
STEP 3.Check the accelerator cable lubricant.
Q: Is the accelerator cable lubricated sufficiently?
YES: There is no action to be taken.
NO: Refill or replace the lubricant, then go to Step 4.
STEP 4.Check symptom.
Q: Does the accelerator pedal work normally?
YES: This diagnosis is complete.
NO: Go to Step 1.