Ignition Switch: Service and Repair
REMOVAL SERVICE POINTS
<> STEERING LOCK CYLINDER REMOVAL
1. Insert the key in the steering lock cylinder and turn it to the "ACC" position.
2. Using a Phillips-head screwdriver (small) or similar tool, push the lock pin of the steering lock cylinder inward and then pull the steering lock cylinder toward you.
<> IGNITION KEY RING ANTENNA REMOVAL
Turn the ignition key ring antenna to the left and remove it.
INSTALLATION SERVICE POINT
>>A<< COLUMN SWITCH ASSEMBLY INSTALLATION
Tighten the column switch assembly mounting screws to the specified torque in the order of 1, 2 and 3.