Fastener Tightening Specifications
FASTENER TIGHTENING SPECIFICATIONSITEM SPECIFICATION
EGR solenoid valve and evaporative emission purge solenoid valve 9.0 ± 1.0 Nm (80 ± 9 in-lb)
assembly bolt EGR valve bolt 20 ± 2 Nm (15 ± 1 ft-lb)
Intake manifold bolt and nut 20 ± 2 Nm (15 ± 1 ft-lb)
Intake manifold stay bolt 31 ± 3 Nm (23 ± 2 ft-lb)
Knock sensor connector cramp bolt 11 ± 1 Nm (98 ± 8 in-lb)
Manifold differential pressure sensor bolt 5.0 ± 1.0 Nm (45 ± 8 in-lb)
Oil dipstick guide bolt 13 ± 1 Nm (115 ± 9 in-lb)
Thermostat housing assembly bolt 23 ± 4 Nm (17 ± 3 ft-lb)
Vacuum hose and pipe assembly bolt 9.0 ± 1.0 Nm (80 ± 9 in-lb)
Vacuum pipe bolt 4.9 ± 0.9 Nm (43 ± 8 in-lb)