Trailing Arm Bushing: Service and Repair
TRAILING ARM BUSHING REPLACEMENTRequired Special Tools:
^ MB990890: Rear Suspension Bushing Base
^ MB990947: Lower Arm Bushing Arbor
^ MB991816: Bushing Remover and Installer Base
1. Use the special tools to drive out the trailing arm bushing.
2. Set the installation direction and installation location of the trailing arm bushing.
1. Place the long projection end of the trailing arm bushing inner pipe towards the inside of the vehicle.
2. Make sure that the hollow of the trailing arm bushing is located as shown in the illustration.
3. Using the special tool, press the trailing arm bushing into the position shown.