Rear Wiper Motor Check

REAR WIPER MOTOR CHECK






Inspect the rear wiper motor is conducted by removing the harness connector with the motor attached to the vehicle.

WIPER MOTOR OPERATION
Connect the battery to the rear wiper motor as shown in the illustration (A) and check the motor operation.

WIPER MOTOR AT STOP POSITION OPERATION
1. Connect the battery to the rear wiper motor as shown in the illustration (A).
2. Disconnect the battery cable from the rear windshield wiper motor while it is turning and then check to see that the motor stops.
3. Re-connect the battery as shown in Figure (B).
4. Check to see that the rear windshield wiper motor runs and then stops at the automatic stop position.