Removal and Replacement

Part 1:

Part 2:

Part 1:

Part 2:

Remove the starter motor with the starter motor harness still connected, and secure it inside the engine compartment.

<> TORQUE CONVERTER AND DRIVE PLATE CONNECTION BOLT REMOVAL
1. Remove the six connection bolts while turning the crankshaft.
2. Press in the torque converter to the transmission side so that the torque converter does not remain inserted in the engine side of the drive plate.

INSTALLATION SERVICE POINTS
>>A<< TRANSMISSION ASSEMBLY INSTALLATION

1. Press the torque converter into the transmission properly, and then assembly into the engine.
Reference value: 20.9 mm (0.8 inch)

2. The size of the mounting bolts are different. So be sure not to confuse them.

>>B<< TRANSMISSION CONTROL CABLE INSTALLATION

CAUTION: Clamp the control cable socket into the transmission bracket securely.